uv·life UFO 200 UV-C LED lamp
Lights the room. Disinfects it too.
A UV-C light with an E27 base for disinfecting processing areas. It emits at 260–285 nm, the germicidal peak of DNA (~265 nm), with no mercury and a sensor that shuts the UV-C off when people are present.
What is the UFO 200 UV-C LED lamp?
The UFO 200 is a UV-C LED lamp with a standard E27 base, built for processing areas. Alongside disinfecting with UV-C at the germicidal peak of DNA (~265 nm), it works as an ordinary light. One unit covers up to 16 m² (172 sq ft) at mounting heights up to 3 m (10 ft).
Germicidal UVC LED
It emits at 260–285 nm, the absorption peak of microbial DNA: the same dose in mJ/cm² goes further, at lower power draw.
Safety around people
A motion sensor (UVC Block 5.8G) shuts the UV-C off when people are present. Manual (180 min) and automatic (30 min per cycle) modes.
Lights and disinfects
Beyond UV-C disinfection, it works as a normal light. Standard E27 bulb format, mercury-free. Coverage of 16 m² (172 sq ft) per unit at up to 3 m (10 ft) mounting height.
Tested and certified
Backed by CE, SGS and CESMEC (Chilean testing laboratory) certificates. One-year warranty.
UV-C LED vs. mercury lamp — what's the difference?
Competing fixtures deliver their dose at 254 nm with mercury lamps. The UFO 200 emits at 260–285 nm, the germicidal peak of DNA (~265 nm): the same dose in mJ/cm² goes further, with no mercury and an E27 socket you can use right away.
| Feature | uv·life · UFO 200 LED | Competitors · Hg lamp |
|---|---|---|
| Wavelength | 260–285 nm · germicidal peak of DNA✓ | Fixed 254 nm |
| Source | Solid-state LED, mercury-free✓ | Mercury lamp (hazardous waste) |
| Safety | Sensor shuts the UV-C off when people are present✓ | No automatic shutoff |
| Installation | Screws straight into an E27 socket, no fixture needed✓ | Dedicated fixture required |
Up to 16 m² (172 sq ft)
Coverage of 16 m² (172 sq ft) per unit, at mounting heights up to 3 m (10 ft), with a 90° beam angle. Twelve UV-C LED diodes.
Specifications
| Diode type | UV-C LED |
| Wavelength | 260–285 nm |
| UV output | 180 mW |
| Diode count | 12 |
| Disinfection area | 16 m² (172 sq ft) |
| Beam angle | 90° |
| UV service life | >5,000 hrs |
| Function | Lighting + UV-C disinfection |
| Base / socket | E27 |
| Safety sensor | UVC Block 5.8G |
| Modes | Manual 180 min · Automatic 30 min per cycle |
| Voltage | 100–240 Vac · 50/60 Hz |
| Size | Ø200 × 72 mm (7.9 × 2.8 in) |
| Weight | 330 g (11.6 oz) |
| Certifications | CE · SGS · CESMEC |
| Warranty | 1 year |
Technical drawing
How do you use the UFO 200 safely?
Screws into an E27 socket, ready to install
Always wear personal protective equipment during installation
The UVC Block 5.8G sensor shuts the UV-C off when people are present
Manual (180 min) or automatic (30 min per cycle) modes
Certifications
UV-C disinfection for your processing area
uv·life UFO 200 UV-C LED lamp · ~265 nm germicidal peak · 180 mW · 16 m² (172 sq ft) coverage per unit at up to 3 m (10 ft) mounting height · safety sensor. Lead time agreed at quotation.